Table Saw | Tool Box Buzz https://www.toolboxbuzz.com/category/cordless-tools/table-saw-cordless-tools/ Tool Reviews By PRO Contractors Thu, 19 Dec 2024 13:39:19 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.2 Best Cordless Table Saw | 2024 Head-To-Head https://www.toolboxbuzz.com/head-to-head/best-cordless-table-saw-2024-head-to-head/ https://www.toolboxbuzz.com/head-to-head/best-cordless-table-saw-2024-head-to-head/#comments Sat, 16 Nov 2024 20:48:51 +0000 https://www.toolboxbuzz.com/?p=47512 You are reading a copy of content from ToolBoxBuzz.com. If you'd like to read it from the original source please follow the link at the bottom.

Best Cordless Job Site Table Saw When it comes to choosing the right table saw, professionals know that not all tools are created equal. With so many options on the market, it’s essential to understand how different models stack up in real-world scenarios. In this comprehensive Head-2-Head comparison, we put six of the top cordless […]

Best Cordless Table Saw | 2024 Head-To-Head is a post from Tool Box Buzz

]]>
You are reading a copy of content from ToolBoxBuzz.com. If you'd like to read it from the original source please follow the link at the bottom.

Best Cordless Job Site Table Saw

When it comes to choosing the right table saw, professionals know that not all tools are created equal. With so many options on the market, it’s essential to understand how different models stack up in real-world scenarios. In this comprehensive Head-2-Head comparison, we put six of the top cordless table saws to the test, evaluating their performance on precision, power, ease of use, and safety. Whether you’re a seasoned contractor or a woodworking enthusiast, this guide will help you make an informed decision and find the saw that best meets your needs in the workshop. Let’s dive in and see which saw comes out on top!

Cordless Table Saw | Selection Criteria

We chose to test six saws in the 8-¼” range focusing on the mobile Pro contractor. In the end, we allowed Metabo HPT to send us their 10- inch and Festool to send their 168 mm [6.6”] saw because they did not have an 8-¼” saw.

Table Saw Specifications

Bosch

  • Model: GTS18V-08
  • Bare Tool Price: $399.00
  • Blade Size: 8-¼
  • Voltage: 18V
  • Max RPM Speed: 5,500 RPMs
  • Rip Capacity Left: 12”
  • Rip Capacity Right: 25”
  • Weight: 44 lbs
  • Max Cut Height 90°: 2-½”
  • Max Cut Height 45°: 1-¾”

DEWALT

  • Model: DCS7485B
  • Bare Tool Price: $449.00
  • Blade Size: 8-¼
  • Voltage: 60V
  • Max RPM Speed: 5,800 RPMs
  • Rip Capacity Left: 12”
  • Rip Capacity Right: 24”
  • Weight: 52.69 lbs
  • Max Cut Height 90°: 2-½”
  • Max Cut Height 45°: 1-¾”

Festool

  • Model: CSC CYC 50 EB
  • Bare Tool Price: $1,499.00
  • Blade Size: 168 mm, 6.6”
  • Voltage: (2) 18V
  • Max RPM Speed: 6,800 RPMs
  • Rip Capacity Left: 0”
  • Rip Capacity Right: 11-¼”
  • Weight: 33.08 lbs
  • Max Cut Height 90°: 1-⅞”
  • Max Cut Height 45°: 1-11/32”

FLEX

  • Model: FX7211
  • Bare Tool Price: $449.00
  • Blade Size: 8-¼
  • Voltage: 24V
  • Max RPM Speed: 6,000 RPMs
  • Rip Capacity Left:12”
  • Rip Capacity Right: 25”
  • Weight: 50.73 lbs
  • Max Cut Height 90°: 2-⅝”
  • Max Cut Height 45°: 1-⅞”

Metabo HPT

  • Model: C3610DRJ
  • Bare Tool Price: $599.00
  • Blade Size: 10
  • Voltage: 36V
  • Max RPM Speed: 5,000 RPMs
  • Rip Capacity Left: 22”
  • Rip Capacity Right: 35”
  • Weight: 67.3 lbs
  • Max Cut Height 90°: 3-⅛”
  • Max Cut Height 45°: 2-¼”

Milwaukee

  • Model: 2736-20
  • Bare Tool Price: $449.00
  • Blade Size: 8-¼
  • Voltage: 18V
  • Max RPM Speed: 5800RPMs
  • Rip Capacity Left: 12”
  • Rip Capacity Right: 24-½”
  • Weight: 41.6 lbs
  • Max Cut Height 90°: 2-½”
  • Max Cut Height 45°: 1-¾”

Cordless Table Saw | Evaluation Format

Our team has put significant time and effort into our Head-to-Head evaluation to provide you with the most comprehensive information available. For this evaluation, we divided the analysis into several categories:

  1. Precision & Accuracy
  2. Performance
  3. Price
  4. Features, Usability & Ergonomics
  5. Saw Stand Evaluation
  6. We also chose the best value saw and also discuss decibels.

How Most Table Saws Are Used In Job Sites

When these saws arrive on-site, they are quickly unboxed, assembled, and put to immediate use. Users expect them to be mostly accurate. So we looked at the saws out of the box and then corrected any accuracy deficiencies prior to our power testing.

Best Cordless Table Saw | What and How We Measured

To assess the manufactured accuracy of the eight saws, TBB evaluated six key areas:

  1. Table Flatness,
  2. Accuracy of 45° Stop,
  3. Accuracy of 90° Stop,
  4. Blade Parallel to Miter Slot,
  5. Fence Parallel to Miter Slot,
  6. Saw Blade Runout

Best Cordless Table Saw | Accuracy Testing Procedures

Table Flatness

We assessed the flatness of the table by placing the edge of a precision-ground flat bar across it and using feeler gauges to measure any gaps. Measurements were taken in four directions:

  1. Front-to-rear at the arbor
  2. Left-to-right at the arbor
  3. Upper left-to-lower right table corners
  4. Upper right-to-lower left table corners

This comprehensive data collection allowed us to create a ranked set of results by assigning a 1-2-3 rating to the relative values of the measurements. We then ranked the saws for overall table flatness as manufactured. For context, a typical sheet of copy paper is approximately 0.004 inches thick.  Our measurements ranged from 0.004 to 0.026 inches.

 

The saws individual flatness scores across the 4 measurements are added to a summarized score.  The saws are then ranked based on that score.

The Bosch ranked the highest in table flatness with a maximum measured deflection was .011″.  The Flex was a close second followed by a three way tie for third with the DEWALT, Metabo HPT and Milwaukee.  Surprisingly, Festool had the most deflection in its table with this measurement method.  The Festool has a unique feature where the left side of the table can glide front and back to act as pseudo cross-cut sled. There is a small variable in the height between the sliding and the stationary sections of the table.

Accuracy of 45° Stop

To measure the accuracy of the factory-set 45-degree stop, We used a Beall digital inclinometer, which has an accuracy of 0.1 degrees. The process began by placing the Beall gauge on the table and calibrating it to zero relative to the table surface. After calibration, we attached the gauge to the blade and adjusted the blade incline until it hit the factory-set 45-degree stop. The measurement was recorded, and the test was repeated to ensure repeatability, with results consistently within 0.1 degrees of each other.

For contractors using their job site saws for high-quality built-ins or precise finished cuts, saw accuracy is crucial. The out-of-the-box accuracy from the manufacturer directly impacts the quality of the cuts and the safety of the operator. We compared the relative accuracy of the saws immediately after assembly to determine their “as-built” precision. The results showed how each saw stacked up in terms of manufactured tolerances and overall accuracy.

Accuracy of Vertical 90° Stop

We measured the accuracy of the factory-set 90-degree stop using the same digital inclinometer. After calibrating the gauge to the saw’s table, we moved the blade to approximately 70 degrees off vertical and then adjusted it to the factory-set 90-degree vertical stop. The measurement was recorded and repeated, with consistent results within 0.1 degrees of the previous tests. All of the saws were perfect at 90 degrees.

Blade Parallel to Miter Slot

To measure the blade’s alignment with the miter slot, we used an iGauging 35-125-4 digital dial indicator, accurate to 0.0005 inches. A new Diablo blade was installed in each saw, and the blade height was set to 2-inches.

We marked a single tooth as the reference point, positioned that tooth at the rear of the saw, and the dial indicator was set to zero against the marked tooth. The blade was then rotated to the front of the saw, and the same tooth was measured again.
A negative reading indicated the blade and miter slot were closer together at the front, while a positive reading indicated they were farther apart.

By analyzing the data from these tests, We were able to rank the saws based on their as-built accuracy and alignment.
Note – we placed a Diablo 8-1/4″ blade on the Metabo HPT for testing, but were not able to use a Diablo blade on the Festool, we used compatible tooth count Festool OEM blades.

Saw Fence Parallel to Miter Slot

The accuracy and safety of a saw depend on the blade being parallel to the rip fence. Having already tested the parallelism between the blade and the miter slot, the next step is to check if the miter slot is parallel to the rip fence. This ensures a parallel relationship between the blade and the rip fence.

We used the iGauging 35-125-4 digital dial indicator to measure the accuracy of the factory-set fence relative to the table’s miter slot. We started by locking the fence in position approximately 1 inch away from the blade on the side opposite the miter slot. The throw of the dial indicator was adjusted to take readings in the middle of the indicator’s range of movement, ensuring consistency and accuracy in the measurements.

We calibrated the iGauging dial indicator to zero at the operator’s end of the rip fence. Then, we positioned the dial indicator at the rear of the saw, placed it on the rip fence, and took the reading. If the fence and the miter slot were closer together at the rear of the saw, the dial indicator showed a positive reading. Conversely, if they were farther apart, the dial indicator displayed a negative reading. A positive reading indicated that the materials being cut might be pinched, increasing the likelihood of kickback.

 

 

Saw Fence Parallel to Miter Slot | After Adjustment

It is important to note that all saws were adjusted after the accuracy evaluation and before the performance testing. With the exception of blade run-out, other adjustments can be made to fine-tune the saws. We were able to adjust the saws to the following:

Being able to reliably and repeatedly adjust the fence is an important feature of any table saw.

Blade Run-out

Blade run-out describes how much the edge of a saw blade wobbles while mounted on the motor shaft. Measuring run-out with a saw blade assumes the blade is nearly perfect in flatness. To ensure accurate measurements, TBB used a Freud calibration plate, which is ground to a flatness tolerance of ±0.0005 inches.

We used the Freud calibration plate on each test saw to measure run-out. After removing the new Diablo blade and installing the calibration plate, we raised the trunnion to its maximum vertical adjustment. A black mark on the calibration plate provided a consistent starting position for the run-out test, using the iGauging dial indicator.

 

We carefully rotated the calibration plate by its outer rim to avoid side-to-side force that could skew the results. We recorded the maximum reading on the dial indicator and validated it by repeating the test, ensuring consistent readings. Notably, the maximum readings occurred at different points along the plate’s rotation across the eight saws, reinforcing our confidence in the plate’s flatness.

Precision Summary – Winner FLEX

Based on the data from the 7 individual tests, we compiled a summary ranking to determine the overall winner for as-built accuracy. Here are the results: FLEX was consistently accurate and precise in 6 out of 7 categories. Milwaukee was a close second followed by DEWALT.

 

Best Cordless Job Site Table Saw | Performance Testing

For this segment of the testing, we used two different materials (3/4″ CDX Plywood, and 2x KD lumber while measuring the saw blade RPM drop. We assessed the saws performance based on their blade speed under load and speed of cut.

Blade Speed (RPM under load vs no load)

The first performance measurement we looked at was blade speed while cutting all the test materials. This test provides a relative comparison of blade speed reduction under different loading conditions, giving us an idea of the motor/gearbox combination strength for each saw. We recorded the “no-load” speed to capture the relative drop in RPM during cutting. We used our measured no-load speeds instead of the manufacturers’ published values.

 

To measure blade speed, we used a digital laser, non-contact tachometer. Reflective tape was adhered to each saw blade just behind the carbide tooth, positioned above the wood cutting surface, allowing us to capture blade speed during the cuts.

 

A power feeder ensured consistent feed rates through each saw. We used a Diablo 8-¼” 24-tooth Framing blade in all the saws, including the Metabo HPT [10-inch saw] and for the Festool saw we used a 42 tooth finish [168 mm] Wood Universal Blade.

Performance Summary – Winner DEWALT

To determine our power winner we measured the percentage of RPM drop of the saw under a slow-feed cut and a fast-feed cut. By averaging the RPM drop across these two scenarios we determined our power ranking.

 

 

 

 

 

 

 

 

DEWALT had the most available power and showed the least RPM drop under load with just a 14% drop in RPM. By comparison the next closest was FLEX with a 19% drop and Milwaukee with 24%. The Festool was unable to complete either cut without overloading.

Manual Hand Feed Comparison

To validate our power feeder rig, we conducted a cutting speed test without it. One operator handled the test, feeding the material as quickly as possible while monitoring the saw’s motor and adjusting the feed rate accordingly. The operator adapted the speed for each cut, either speeding up or slowing down as needed. We made several cuts and recorded the fastest time achieved.

The hand feed result and the subsequent ranking matched the result seen in the power feed test.  The gap between the FLEX and Milwaukee was closer in the 2nd and 3rd place race.  The Festool was still unable to complete the test without overloading.

 

Best Cordless Table Saw | Price Comparison – Bosch

We ranked the table saws using their bare tool pricing. The Bosch was the least expensive at $399.00, with DEWALT, FLEX and Milwaukee tied at $499.00. Metabo HPT was $599.00 and the Festool was $1,499.00.

Ergonomics & Features

When evaluating cordless jobsite table saws, ergonomics play a crucial role in ensuring tools are both efficient and safe to use. Ergonomics focuses on designing tools that enhance productivity while reducing discomfort, fatigue, and the risk of injury.
Features such as well-placed handles, riving knives, safety switches, and non-slip coatings contribute to the overall ergonomic performance of a saw.

Evaluation Factors

In our ergonomic evaluation of cordless table saws, we considered the following factors and rated them on a scale of 1 to 6 (1 being best):

Weight

Below is a summary based on the provided weights for the different brands. These figures show the relative heaviness of each model with its battery, with Metabo HPT being the heaviest at 62.4 lbs, and Bosch being the lightest at 45.7 lbs.

Power Switch

Ease of use and safety are major considerations for our team, especially with the large, easy-to-actuate power switches.
Bosch and FLEX had the best switch, both are pulled into the on position, or shut off with the users knee. The team found them to be simple and intuitive.

The Festool has a two-step process to turn the saw on, requiring activating a master power switch, followed by the power on switch. The saw cannot be stopped easily with a knee.

The DEWALT has a red paddle, however, when held at its highest point and released, the paddle can accidentally shut off the saw due to the closing momentum. This occurs occasionally.

On Board Storage

The Festool was superior with its Systainer based accessory storage. The Milwaukee came in second with excellent accessory storage secured with a permanent mounted, spring-loaded securing nut. All the other saws had removable wing-nuts that can be easily lost.

Fence

The Flex fence is a rack and pinion style similar to DEWALT and Milwaukee. The only real difference is that the FLEX fence has a rechargeable, 12 LED light strip built into the fence. This light is activated by a rocker switch on the rear side of the fence. The DEWALT and Milwaukee fence are super smooth to operate, and capable of precise 1/64” adjustments.

 

The Bosch saw also has a rack-and-pinion system, but we experienced jerky micro adjustments. Additionally, the fence lock is on the left side of the knob, which can be awkward, especially for DEWALT and Milwaukee users.
Festool has a lever-lock fence that indexes and slides in a dado. We found that it was not as smooth as other saws and took effort to dial in. The fence requires unlocking with a knob, sliding out, reversing, and sliding in for narrow rips. The fence can be removed and stored in a Systainer.

 

Metabo HPT has a pull-to-lock mechanism, which is opposite of Bosch, DEWALT, and Milwaukee saw. The team found it choppy when trying to dial in 1/64”. The fence features a twist knob to lock on or remove, requiring users to push tabs to engage which is less intuitive than other models. The fence also rotates for extended support or narrow rips, requiring a sub-fence assembly that stores on the side of the saw.
Raising Blade

The Festool blade can be adjusted to a precise height using an electronic control linked to a 1/64-inch digital display. In comparison, raising the blade on the Flex saw is quick, requiring just 9¾ hand rotations.

 

Hand Rotation Results are as follows:

  • FLEX: 9-¾ rotations
  • Bosch: 13-¾ rotations
  • DEWALT: 35-¾ rotations
  • Metabo HPT: 29-¾ rotations.
  • Milwaukee: 15 rotations.

Ripping Width

Most of the 8-¼” saws had similar ripping widths.
The Metabo HPT is a 10-inch saw and as a result has the largest ripping capacity at 35-¼” to the right and 22-⅜” to the left.

Bevel Adjustments

The Festool had the widest bevel range from -10 to 47 degrees.

Riving Knife Adjustments

The riving knives were either removable or non removable. The Milwaukee riving knife was the easiest to adjust or remove. It requires a uses a easy to actuate, pull lever to release the riving knife.

The FLEX uses a flip down lever to release the riving knife. The user needs to tilt the riving knife out and down to seat it, which is not intuitive. Overall we liked the feature, once you get the hang of it.

The DEWALT has an easy to turn knob to loosen and a simple depress on the knob removes the riving knife. The Bosch has a lever that turns to adjust, locks in at multiple positions, but is non-removable. The Festool requires too many steps to access, but super easy to remove once accessible. Locks in at one height and is removable.

The Metabo HPT has a nicely machined aluminum cam lever, but was stiff to actuate. It has three height positions and is non-removable.

Guard

We evaluated the saw blade guards and found that the Metabo HPT was super easy to install. The Bosch was clunky and awkward to attach. The DEWALT features a 1-⅝” OD (1-⅜” ID) dust shroud on the blade guard. Milwaukee was similar to DeWalt but without a dust shroud. The Festool required many steps but was super easy.

Battery Gauge

The FLEX has the brightest battery LED gauge, with 4 LEDS. This feature can be activated with the saw in the off position. Bosch has a bright green, 3-LED light above the power switch but does not activate unless the saw is powered on. Festool has two battery symbols on the top left corner of the LCD screen, which can be hard to see in daylight. The rest of the saws require pushing the battery indicator, all facing in the user’s direction.

Best Cordless Table Saw | Feature Winner – FLEX

FLEX’s cordless table saw has set a new standard in its category, emerging as the feature winner with an impressive performance. Scoring a low 31 points across 14 categories, FLEX excelled by taking top honors in six distinct areas, outshining many competitors.

 

While Milwaukee scored 37 points and Bosch came in with 44 points, FLEX’s unique features make it a strong contender. The saw is equipped with a folding side extension table, which enhances stability and support for larger workpieces—an invaluable asset for both professional woodworkers and DIY enthusiasts.

Additionally, the FLEX table saw includes innovative rechargeable LED lights integrated into the rip fence, providing excellent visibility for precise cuts. This thoughtful design element not only improves visibility and enhances safety by illuminating the work area.

Best Tablesaw Stand -Winner Milwaukee

Our crew found that saws with scissor stands were the fastest and easiest to set up. Brands like DEWALT, Bosch, Milwaukee, and Flex all offer models with scissor stands. Bosch, Flex, and Milwaukee have latches that lock the saw to the stand, making them highly mobile; you can easily pick up and relocate the saw since they lock together.

Photo: Bosch Saw

In contrast, the DEWALT stand does not have a locking mechanism, which often results in the saw sliding off when users try to move it. The Milwaukee stand features an adjustable foot for leveling, while the Bosch stand has rear legs that extend further than the others, providing added stability but also creating a potential trip hazard.

 

 

The Festool setup includes the MFT table and dolly, which takes up more space than the scissor stands. Although the Festool saw sits in grooves marked on the tabletop to assist with placement, it does not lock in place, making it awkward to move once set up. This system is more suited for rolling from the truck to the job site and can stack with other Systainers to save space inside a vehicle.

 

 

 

 

The Metabo HTP stand is excellent but requires bolting to the saw, creating a semi-permanent pairing. It features sturdy folding tubular legs, an adjustable leg, and roller wheels. While the crew appreciated this setup, they found it too large to be considered a truly mobile table saw, as it’s not easy to lift into a vehicle.

Decibels

All of the saws were quite loud, with decibel levels ranging from 104 to 106 dB. We concluded that a difference of just 2 dB was not sufficient to effectively differentiate or score the saws.

Best Portable Job Site Table Saw – Winner FLEX

Choosing the best portable job site table saw was a challenge, as our testing focused on the everyday mobile contractor.
FLEX, being new to the market, had ample time to perfect their saw. With a total score of 8 points, the FLEX portable jobsite table saw ranks first overall in our assessment, showcasing its balance of accuracy, usability, and value. While it may not lead in every individual category, its combination of strengths makes it an excellent choice for contractors seeking a dependable and cost-effective tool, particularly for those prioritizing performance without a high price tag.

 

The Milwaukee portable job site table saw ranks second overall with a score of 10 points. Its strong performance in accuracy, power, and ergonomics makes it an appealing option for contractors who value precision and reliability. The stability provided by its stand further enhances its appeal, ensuring safe operation in various job site conditions. In summary, the Milwaukee table saw represents a solid investment for professionals looking for a high-performing, durable tool that delivers consistent results. While it comes at a slightly higher price, its overall value in terms of performance and usability makes it worthwhile for serious contractors.

 

 

The DEWALT portable jobsite table saw ranked third overall with a score of 14 points. Its strengths in power and competitive pricing make it a reliable choice for contractors seeking a powerful saw. Although it may not excel in every category, it provides a well-rounded performance that meets many professionals’ needs. In summary, the DEWALT table saw offers a good balance of power, accuracy, and affordability, making it an attractive option for contractors who prioritize performance and value. Its reputation for reliability further enhances its appeal, ensuring it remains a popular choice in the job site tool market.

The new Festool table saw did not quite fit our testing criteria and, due to its high price, is likely to attract a specific user base. While it is expensive, it offers several key advantages: designed for precise cuts, it is ideal for job sites or workshops with limited space and seamlessly integrates with other Festool products, enhancing workflow for brand users.  We feel that the Festool is best suited for professional woodworkers, carpenters, finish carpenters, and those who value precision and portability.

 

 

Best Value Winner – FLEX

“Best value” is a crucial category in tool comparisons as it balances decision-making by considering both performance and budget, leading to practical choices that provide long-term savings and higher overall satisfaction by ensuring durability and reliability.

Best Cordless Table Saw | Final Thoughts

These tests and evaluations are demanding, time-consuming, and limited in scope since we are not a professional testing company and have restricted time for evaluations. We are unable to conduct long-term testing to assess durability, nor can we test every possible application for which you might use these saws. Nevertheless, we believe that all the table saws in this Head-to-Head are quality tools, and our testing highlights the pros and cons of each model.

 

 

Ultimately, everyone must choose a tool based on their specific needs, uses, and budget. With all the data provided above, we are confident that you can make a more informed decision when purchasing your next portable jobsite table saw.

 

Best Cordless Tables Saw Comparison Video

 

Best Cordless Table Saw | 2024 Head-To-Head is a post from Tool Box Buzz

]]>
https://www.toolboxbuzz.com/head-to-head/best-cordless-table-saw-2024-head-to-head/feed/ 4
Metabo HPT 36V MultiVolt Table Saw Review https://www.toolboxbuzz.com/uncategorized/metabo-hpt-36v-multivolt-table-saw-review/ https://www.toolboxbuzz.com/uncategorized/metabo-hpt-36v-multivolt-table-saw-review/#respond Wed, 08 Mar 2023 01:43:25 +0000 https://www.toolboxbuzz.com/?p=30334 You are reading a copy of content from ToolBoxBuzz.com. If you'd like to read it from the original source please follow the link at the bottom.

Metabo HPT 36V MultiVolt Cordless 10″ Table Saw Review   Metabo HPT is updating and improving venerable tools from the old Hitachi line. The Metabo HPT 36V MultiVolt cordless 10″ table saw is a great example of this. This tool review takes a look at the Metabo HPT Model #C3610DRJQ4 MultiVolt Table Saw. Metabo HPT […]

Metabo HPT 36V MultiVolt Table Saw Review is a post from Tool Box Buzz

]]>
You are reading a copy of content from ToolBoxBuzz.com. If you'd like to read it from the original source please follow the link at the bottom.

Metabo HPT 36V MultiVolt Cordless 10″ Table Saw Review

 

MultiVolt 36V 10" Table Saw

4/5
Manufacturer: Metabo HPT
Model number: C3610DRJQ4
Price: $599.00
Power source: 36V MultiVolt Battery or AC Adapter
Weight: 67.3 Lbs. W/ Battery
Metabo HPT is updating and improving venerable tools from the old Hitachi line. The Metabo HPT 36V MultiVolt cordless 10″ table saw is a great example of this. This tool review takes a look at the Metabo HPT Model #C3610DRJQ4 MultiVolt Table Saw. Metabo HPT improved upon the Hitachi 10″ Job Site Table Saw by adding advanced electronics, features, and cordless convenience. The MHPT saw is a modern solution for today’s job sites and contractors.

I meet many contractors that are still completely against large high-demand cordless tools. Whether it is a table saw, a miter saw a router, or any other high-demand tool. They lack confidence in the battery-powered system’s ability to keep up. Metabo HPT’s MultiVolt system takes those concerns completely out of the equation. Powerful 36V batteries coupled with a plug-in AC Adapter give the best of both worlds. Moreover, MHPT gives users a large, stable, and easy-to-use tool in addition to multiple power sources.

MultiVolt Table Saw Specs

  • Blade Diameter: 10″ x 5/8″
  • Included Blade: 10″ 40 Tooth Carbide Tip
  • Blade Kerf Range: 2.3-2.5mm
  • No Load Speed: 5,000 RPM
  • Bevel Range: 0-45°
  • Miter Gauge Range: 60° Left or Right
  • Depth of Cut at 0°: 3 1/8″
  • Depth of Cut at 45°: 2 1/4″
  • Max Rip Capacity Left of Blade: 22″
  • Max Rip Capacity Right of Blade: 35″
  • Dado Max Width: 3/16″
  • Working Table Size: 28 3/4″ X 22″
  • Weight: 67.3 Lbs. W/ 4.0 Ah Battery
  • Warranty: 2 Year Tool Body

Standout Features of the Metabo HPT MultiVolt Table Saw

Onboard Tool Storage

Metabo HPT includes an anti-kickback assembly with pawls, a miter gauge, push stick, VIC rip fence (for narrow stock) as well as two blade change wrenches with the MultiVolt table saw. There is a dedicated holder for each tool built into the saw’s housing. This feature makes accessing a tool extremely easy. In particular, the push stick is located on the right side of the saw housing. As a right-handed user, it is exceptionally intuitive to grab the push stick while feeding material into the saw.

Smart and Safe Power Switch Design

Turning a job site table saw on and off should require deliberate action. Doing this keeps everyone on-site safer and more importantly focused on the task of cutting. Lots of things can go wrong very quickly when using a table saw. Metabo HPT addresses some of these concerns with a well-designed activation switch. A spring-loaded cover protects the green-colored “on” button. Equally important is the large oversized red “off” paddle switch. This switch is easy to mash with a hand, a knee, a foot, or whatever appendage you can reach it with. Once the “off” switch is engaged, the saw’s electric brake system kicks in and stops the blade almost instantly.

Well Placed Adjustment Controls

A common theme with this saw is the well-placed, large, easy-to-use controls. Whether setting blade angle, adjusting blade height, or dialing in the fence, these tasks are easily accomplished with one hand on the MultiVolt table saw. That ease of adjustment is paramount on a job-site saw. Each adjustment scale is also clearly, and accurately, labeled for quick reference.

Rack and Pinion Fence Adjustment

The rack and pinion gear system for the fence adjustment is one of my favorite features. Many other manufacturers use a similar system, but the Metabo HPT is my favorite iteration of it. The large knurled dial is easy to grasp. The lock lever shores up the fence and secures it into position. Out of the box, the fence was true to the factory measuring scale. But the adjustment is relatively painless thanks to the aluminum track design.

Large Stable Work Platform

This is not a compact saw. At 28 3/4″ x 22″ the table of the MHPT saw is a large and steady work surface. This may seem obese to contractors working with smaller stock materials and trim, but for larger boards and sheet goods, the thiccness is appreciated. Currently, the saw ships as a bare tool only. I requested a folding stand from Metabo HPT with the saw and they were able to accommodate me. The stand came in their Hikoki brand packaging, but upon further investigation, I see that this stand is identical to the one provided with the Hitachi corded saw. If you are a current owner of the corded version, the MultiVolt saw should bolt directly to your current stand. The saw sits at a comfortable waist-level working height on the stand. For me, at 6′ 3″ and wearing boots, it seems about perfect.

36V Power Vs. MultiVolt Convenience

So what good is a cordless tool if the batteries don’t last right? Currently, the largest 36V MultiVolt battery available from MHPT is 4.0 Ah. With a freshly charged battery, I was able to make a total of five full-length cuts ripping a 2X4DF plus an additional 14 1/4″ on the sixth. I pushed this test very hard and forced the batteries into a thermal overload situation and had to stop. Because I have multiple MHPT MultiVolt batteries, I am extremely happy with this level of performance. If your daily needs require greater performance, then Metabo HPT has you covered with their plug-in AC Adapter. Some scoff at the idea of a plug-in adapter for cordless tools, but to me, it is an invaluable accessory as a user of the MultiVolt platform.

In terms of performance, the MultiVolt table saw is smooth, quiet, and robust, regardless of which power source you choose. Cutting a variety of materials was no challenge at all. When pushing sheet goods and large framing lumber, the saw refused to bog down. Conversely, when cutting smaller trim pieces and more delicate stock the saw could handle the refined work without issues.

Price and Availability

The MultiVolt table saw has been available from Metabo HPT and other vendors for several years now. In that time it has become increasingly popular. Currently, it is available for $599.00 as a bare tool. This is roughly $100.00 more than the corded model. The corded model also includes a folding stand. If you currently own the corded model saw and are invested in other cordless MultiVolt tools, then the cordless version is a worthwhile upgrade. Metabo HPT tools often have a somewhat higher initial purchase cost than their competitors, but the performance and adaptability of the MultiVolt system provide a great return on that investment. The MultiVolt table saw is no exception to this.

Below is a Buy Now link to purchase this tool from our friends at Acme Tools.

MultiVolt 36V 10" Table Saw
$599.00

Overall Impressions of the MultiVolt Table Saw

In 2018, Tool Box Buzz conducted our Best Portable Jobsite Table Saw Head-2-Head. That test saw the Hitachi 10″ table saw walk away as our top overall winner. An impressive feat to say the least. The MultiVolt table saw from Metabo HPT is the modern cordless interpretation of that saw. MHPT has taken an excellent tool and made it exceptional with their 36V brushless motors and capable MultiVolt technology. I could easily throw a meme in here about “modern problems requiring modern solutions”, but the saw speaks for itself.

I love the fact that it is a large saw. It offers a stable working platform for any job site and would excel as a stowable tool for a home shop. However, I acknowledge that it may be too large for many trailers or work vehicles where space is at a premium. The initial cost of ownership is also slightly high on this tool, but I find it acceptable as a MultiVolt user. Overall I think the MHPT MultiVolt table saw is an exceptional all-around tool and my preferred cordless table saw option. Check it out for yourself and see if the MultiVolt world is for you.

Metabo HPT 36V MultiVolt Table Saw Review is a post from Tool Box Buzz

]]>
https://www.toolboxbuzz.com/uncategorized/metabo-hpt-36v-multivolt-table-saw-review/feed/ 0
Milwaukee M18 Table Saw – 2-1/2 Year Look-Back Review https://www.toolboxbuzz.com/cordless-tools/milwaukee-m18-table-saw/ https://www.toolboxbuzz.com/cordless-tools/milwaukee-m18-table-saw/#comments Mon, 08 Mar 2021 20:44:20 +0000 https://www.toolboxbuzz.com/?p=31469 You are reading a copy of content from ToolBoxBuzz.com. If you'd like to read it from the original source please follow the link at the bottom.

Looking Back At The Milwaukee Table saw and Folding Stand 2-1/2 year ago we tested the Milwaukee M18 Table Saw. Back then we told you we impressed with the quality materials and a metal frame. Oh yea, and it’s cordless! The rack and pinion fence is a quality feature that we’ve come to expect from […]

Milwaukee M18 Table Saw – 2-1/2 Year Look-Back Review is a post from Tool Box Buzz

]]>
You are reading a copy of content from ToolBoxBuzz.com. If you'd like to read it from the original source please follow the link at the bottom.

Looking Back At The Milwaukee Table saw and Folding Stand

Milwaukee M18 Table Saw

5/5
Manufacturer: Milwaukee
Price: $599 [kitted] $450 [Bare Tool]
Power source: Cordless M18 battery
Weight: 40 lbs
2-1/2 year ago we tested the Milwaukee M18 Table Saw. Back then we told you we impressed with the quality materials and a metal frame. Oh yea, and it’s cordless!

The rack and pinion fence is a quality feature that we’ve come to expect from job site table saws. DEWALT was the first to introduce the rack and pinion fence, and we’re BIG fans, since its earned its reputation as a sturdy, repeatable and accurate fence.

We also noted that Milwaukee resolved a Dewalt saw pain-point – the blade height adjustment knob. [operator must rotate the blade height knob many times to get the blade to full height.] M

Better Blade Height Gearing

Milwaukee designed a larger gearing ratio in their blade height and can achieve full blade height in 14 turns. In contrast, the DEWALT requires 35 turns to raise the blade to full height.

One of the biggest improvements compared to the competition is the on/off switch which works easily and effectively. It’s robust and much easier to use than the DEWALT switch that can be frustrating at times.

The frame and handles on the M18 table saw make it very easy to carry and move. Weighing just over 40 lbs this saw is extremely portable and a great option for punch list work, finish work, and remodeling where a large saw isn’t practical.

Milwaukee M18 FUEL Cordless Table Saw GiveawayThe Milwaukee also features a tool-free guard and riving knife removal, which is also an excellent feature. A lever on the rear of the saw easily and quickly releases the riving knife. No need to reach below the table surface into the blade area to release the guard.

Dust Collection

Milwaukee spent some time thinking about dust collection, like DEWALT they installed a canvas cover that “follows” the saw blade trunion.  This design helps keep dust in alignment, with the dust extractor suction and keeps the dust flowing in the right” direction.

The reality is that most contractors do not connect to a dust extractor, but when hooked up to one, it works reasonably well. We use this feature once in a while and it works great.

So Did we get this one right?

Yep we did!  The Table saw has been awesome! Plain and simple. There are NO NEGATIVE issues on the saw whatsoever. Total Keeper!!

Table Saw Stand – The saw stand lost did lose an adjustable foot. We ordered a new one at e-replacementparts.com and haven’t looked back since.

One-Key Features

With regard to the One-Key functionality. A lot of contractors myself included have not “jumped on the One-Key bandwagon,” instead of deferring to larger commercial contractors to get excited about it.

The Milwaukee M18 Table Saw has One-Key technology and as I think more about it there are three major benefits to having it:

  1. Security
  2. Tracking
  3. Asset Management

The reality is after 2.5 years I have yet to use the feature.

 

Milwaukee M18 Table Saw Price and Availability

The Milwaukee M18 table-saw will sell for $589 as a kit [12 Ah battery] and $450 as a bare tool. The stand is an additional $99.00

Milwaukee M18 Table Saw
$599 [kitted] $450 [Bare Tool]

Milwaukee M18 Table Saw Final  Thoughts

We are very impressed with the Milwaukee M18 Cordless 8-1/4” Table Saw and the attention to detail put into it.

This saw is a prime example of the hard work Milwaukee is putting into building out the carpentry core tools, and their commitment to making a cordless job site.

This cordless table saw is a fantastic tool with some nice unique features, it is powerful, has great features, and now competes with the DEWALT Flexvolt!

Healthy competition means better tools for us! Check out our  Dewalt vs Milwaukee Table Saw ~ Comparison Review.

Milwaukee M18 Table Saw – 2-1/2 Year Look-Back Review

Milwaukee M18 Table Saw – 2-1/2 Year Look-Back Review is a post from Tool Box Buzz

]]>
https://www.toolboxbuzz.com/cordless-tools/milwaukee-m18-table-saw/feed/ 2
DEWALT FlexVolt Cordless 8-1/4″ Table Saw – 4 Year Look-Back Review https://www.toolboxbuzz.com/cordless-tools/dewalt-flexvolt-cordless-8-1-4-table-saw/ https://www.toolboxbuzz.com/cordless-tools/dewalt-flexvolt-cordless-8-1-4-table-saw/#respond Sun, 07 Mar 2021 02:23:29 +0000 https://www.toolboxbuzz.com/?p=31458 You are reading a copy of content from ToolBoxBuzz.com. If you'd like to read it from the original source please follow the link at the bottom.

DEWALT FlexVolt Cordless 8-1/4″ Table Saw – Model DCS7485T1 4-1/2 years ago I tested the Flexvolt 8-1/4” table saw. Back then I told you that I was impressed with its portability, versatility, performance, and power. At that time the new table saw had all the same features as their corded sibling. So if you were […]

DEWALT FlexVolt Cordless 8-1/4″ Table Saw – 4 Year Look-Back Review is a post from Tool Box Buzz

]]>
You are reading a copy of content from ToolBoxBuzz.com. If you'd like to read it from the original source please follow the link at the bottom.

DEWALT FlexVolt Cordless 8-1/4″ Table Saw – Model DCS7485T1

4-1/2 years ago I tested the Flexvolt 8-1/4” table saw. Back then I told you that I was impressed with its portability, versatility, performance, and power.

At that time the new table saw had all the same features as their corded sibling. So if you were already used to using a DEWALT table saw, there was NO learning curve.

At that time I told you I was a fan of all DEWALT table saws, but the best feature of this saw is obviously that it’s cordless. I had also inquired whether an accessory power cord was in the making, so users could plug into a power outlet for AC current.

DEWALT, told me back then that the cost for an AC adapter /cord similar to the miter saw accessory, would be substantial as the electrical current needs to be converted from 60v to 120V. They also said they were currently working on an adapter but it was still about 9 months or more away.  Well, that hasn’t happened.




Runtime

We did a runtime test using a 60V, 4 Ah battery pack at the time. We cut  For the 256 lineal feet of IPE decking material, 264 lf of framing lumber, and 608 lf of ¾ plywood. Impressive right?

Back then we told you that if you were serious about using a cordless table saw, we recommended a second battery. While that’s still good advice – DEWALT now offers higher Ah batteries extending the saws runtime even more.

Probably one of the best features of this saw is the amazing rack and pinion fence design.  This fence allows for two positions in order to rip up to 24” material. It’s so nice that everyone else has copied it. I told you back then that the fence was super smooth, and made easy micro-adjustments. That still holds true today.

The fence extends wide enough to allow a 24-inch rip capacity on the right side of the blade and will allow a 12-inch rip to the left of the blade.

The riving knife is also a nice feature and it mirrors the saw blade doing a nice job at keeping the saw kerf from closing behind the blade while ripping, it also helps prevent a bind between the blade and fence from getting caught by the saw teeth on the back of the blade.


Durability

We felt that the DEWALT Cordless 8-1/4” Table Saw was durable for Jobsite use with its metal roll cage protecting the saw and convenient handle for carrying.

We liked the heavy-duty black canvas shroud that is mounted to the underside of the table to the motor.  The canvas is sized to follow the motor as it is raised/lowered or beveled.  The shroud captures and directs dust toward the dust chute. This dust feature works well, well done DEWALT!!

So did we get this right – YEP we did!

The DEWALT FlexVolt Cordless 8-1/4″ Table Saw is still going strong and is used daily.

Our biggest pet peeve with this saw is the safety “stop lever” over the power switch. I believe has been addressed by DEWALT already on upgrades.

The power switch “stop lever” on our saw slaps the stop button if you left it come down too fast. This turns off the saw, seconds after starting it.

After conferring with the product manager at DEWALT, it was determined that the red stop lever spring force was too high.  DEWALT told us back then that they would refine and make adjustments before the tool goes into full production. I hope they did.

Conclusion

We are very impressed with the DEWALT Cordless 8-1/4” Table Saw and the attention to detail put into it.  This saw is a prime example of the hard work DEWALT put into making their tools, and their commitment to making a cordless job site.

This cordless table saw is a fantastic tool with some nice unique features, it is powerful and you can’t beat the fence system!

If you liked this lookback video take a peek at our DEWALT table saw vs Milwaukee table saw a comparison.

DEWALT FlexVolt Cordless 8-1/4″ Table Saw – Look-Back Video Review

 

DEWALT FlexVolt Cordless 8-1/4″ Table Saw – 4 Year Look-Back Review is a post from Tool Box Buzz

]]>
https://www.toolboxbuzz.com/cordless-tools/dewalt-flexvolt-cordless-8-1-4-table-saw/feed/ 0
Cordless Jobsite Table Saw Head-To-Head https://www.toolboxbuzz.com/head-to-head/cordless-jobsite-table-saw-head-to-head/ https://www.toolboxbuzz.com/head-to-head/cordless-jobsite-table-saw-head-to-head/#comments Tue, 11 Sep 2018 02:43:15 +0000 https://www.toolboxbuzz.com/?p=19169 You are reading a copy of content from ToolBoxBuzz.com. If you'd like to read it from the original source please follow the link at the bottom.

Cordless Table Saw – DEWALT vs. Milwaukee We recently tested portable job-site table saws in our Head-T0-Head to determine the Best Portable Jobsite Table Saw, however we excluded the cordless saws. In this head-to-head we’re pitting the two current cordless table saws against each other. The DEWALT 60V FlexVolt DCS7485T1 8-1/4″ against the Milwaukee M18 […]

Cordless Jobsite Table Saw Head-To-Head is a post from Tool Box Buzz

]]>
You are reading a copy of content from ToolBoxBuzz.com. If you'd like to read it from the original source please follow the link at the bottom.

Cordless Table Saw – DEWALT vs. Milwaukee

We recently tested portable job-site table saws in our Head-T0-Head to determine the Best Portable Jobsite Table Saw, however we excluded the cordless saws. In this head-to-head we’re pitting the two current cordless table saws against each other. The DEWALT 60V FlexVolt DCS7485T1 8-1/4″ against the Milwaukee M18 2736-21HD 8-1/4″. While these two saws look pretty similar they certainly are powered using very different voltages with the DEWALT using a 60V MAX (54 volt) battery pack and motor and the Milwaukee using an 18 volt pack and motor. While they use different voltages, they were both tested with the same total battery pack energy of 216 watt-hours.

Table Saw Evaluation Format

Just like our previous corded table saw head to head we’re testing the cordless table saws in the same format. For this evaluation, we broke things into several categories including: Precision & Accuracy, Performance (power), Price, and Ergonomics.

  • Precision & Accuracy – In this category we evaluated the accuracy of the table saws straight out of the box, and how easy it is to make calibration adjustments. We also discuss the quality of the fence system as it relates to ripping accurate cuts.
  • Performance – The performance evaluation took a very deep dive into the power of the saw motors and how well the saws managed different ripping materials including plywood, pressure treated Southern Yellow Pine 5/4 decking and IPE 3/4 decking. We measured saw RPM’s and Amps for each of the cutting materials under constant feed rates.
  • Price – Price is always an important factor in determining which saw is best for a user. We’ve included the current pricing found online for each of the saws at the time of publication.
  • Ergonomics – Ergonomics are really important to users and an important category to consider when purchasing any power tool. In addition to traditional ergonomics, we also included functionality in this category.

Cordless Table Saw Features & Specifications

Before we get into the testing this section includes the features and specifications for each of the two cordless table saws. As you’ll see the two saws offer nearly identical specifications with the only noticeable difference being speed blade and voltage. The size, weight, and features are so similar that you’d swear they were a red and yellow version of the same saw.

DEWALT DCS7485T1

  • Voltage: 60 V MAX (54V nominal)
  • Battery Pack (used in the tests): 60V 4 Ah pack (54V x 4 Ah = 216 Wh)
  • Blade Size: 8-1/4″
  • No Load Blade Speed: 5,800 RPM
  • Rip Capacity – Right: 24″
  • Rip Capacity – Left: 12″
  • Max Depth of Cut at 90 Deg: 2-1/2″
  • Max Depth of Cut at 45 Deg: 1-3/4″
  • Weight: 48 lbs
  • Weight of Bare Tool: 45 lbs
  • Table Height with Stand: 33-3/8″
  • Warranty: 3 Year Limited Warranty

Milwaukee 2736-21HD

  • Voltage: 18 V nominal
  • Battery Pack (used in the tests): 18V 12 Ah pack (18V x 12 Ah = 216 Wh)
  • Blade Size: 8-1/4″
  • No Load Blade Speed: 6,300 RPM
  • Rip Capacity – Right: 24″
  • Rip Capacity – Left: 12″
  • Max Depth of Cut at 90 Deg: 2-1/2″
  • Max Depth of Cut at 45 Deg: 1-3/4″
  • Weight: 46 lbs
  • Weight of Bare Tool: 43 lbs
  • Table Height with Stand: 33-7/8″
  • Warranty: 3 Year Limited Warranty

Cordless Table Saw Precision & Accuracy – Winner DEWALT

Once again we looked at the precision and accuracy of the saws out of the box. TBB compared the relative accuracy of these two test saws. How would the battery powered saws compare to each other? We measured the manufactured tolerances and ranked these saws for as-built accuracy.

What and How We Measured

To assess the manufactured accuracy of the saws, TBB looked at six areas to measure and compare: Table Flatness, Accuracy of 45 Deg. Stop, Accuracy of 90 Deg. Stop, Blade Parallel to Miter Slot, Fence Parallel to Miter Slot, and blade run-out.

Table Flatness

We evaluated the flatness of the table by measuring the flatness by placing the edge of a precision ground flat bar across the table and placed feeler gauges in any gaps to measure any difference between the ground bar and the table. TBB took measurements in four directions. As the operator faces the saw, we measured the flatness at the arbor from front-to-rear; we measured the left-to right flatness at the arbor; we measured the flatness from the upper left-to-lower right table corners; and, finally, we measured the upper right-to-lower left flatness between the corners.

  • Table Flatness Front To Back
    • DEWALT: 0.0025″
    • Milwaukee: 0.012″
  • Table Flatness Left to Right
    • Milwaukee: 0.01″
    • DEWALT: 0.08″
  • Table Flatness Lower Left to Upper Right
    • Milwaukee: 0.015″
    • DEWALT: 0.015″
  • Table Flatness Upper Left to Lower Right
    • DEWALT: 0.008″
    • Milwaukee: 0.028″

The flatness results were close: DEWALT edged out Milwaukee by taking 2 out of the 4 measurements and one tie. As a point of reference, a sheet of paper is only 0.004″ thick.

Accuracy of 45 Deg. Stop

TBB measured the accuracy of the factory-set 45 degree stop by using a Wixey WR365 digital inclinometer. This device has an accuracy of 0.1 degree. We placed the Wixey gauge on the table and calibrated the inclinometer to the table by zeroing out the gauge. After that calibration, the measurements shown on the gauge give a result that is relative to the saw table. We attached the gauge to the blade and used the saw mechanism to adjust the blade incline to the point at which the blade or trunnion hit the factory-set 45 degree stop and recorded the measurement. TBB ran the test twice to ensure the repeatability of the measurement. In every case, the result came out to within 0.1 degree of the prior test.

  • DEWALT: 45.0 degrees
  • Milwaukee: 46.3 degrees

Clearly the DEWALT took this category and the Milwaukee needed some adjustments.

Accuracy of Vertical 90 Deg. Stop

TBB measured the accuracy of the factory-set 90 degree stop by using a Wixey WR365 digital inclinometer. This device has an accuracy of 0.1 degree. We placed the Wixey gauge on the table and calibrated the inclinometer to the table by zeroing out the gauge. After that calibration, the measurements give a result that is relative to the saw table. We moved the blade to an approximate position of 70 degrees off vertical. TBB attached the gauge to the blade and used the saw mechanism to adjust the blade incline to the point at which the blade or trunnion hit the factory-set 90 degree vertical stop and recorded the measurement. TBB ran the test twice to ensure the repeatability of the measurement. In every case, the result came out to within 0.1 degree of the prior test.

  • DEWALT: 90.0 degrees
  • Milwaukee: 89.0 degrees

Clearly the DEWALT took this category and the Milwaukee needed some adjustments.

Blade Parallel to Miter Slot

TBB used an iGauging 35-125-4 digital dial indicator to measure the accuracy of the blade position to the table miter slot. This instrument has an accuracy of .0005 inches. As part of the table saw set-up, TBB installed a new blade in each saw and these never-before-used blades were used in the measurement test. To ensure that any wobble in the blade did not enter into the test results, TBB marked a single tooth as the reference point for the measurement. The blade position was moved to the front of the saw to allow the iGauging dial indicator to hit the tooth immediately behind the carbide tooth, The iGauging dial indicator was calibrated and the indicator had a reading of zero.

We rotated the blade to the rear of the saw to enable the dial indicator to contact the same location of the same tooth behind the carbide portion. We positioned the dial indicator to the rear of the saw placed onto the blade and the reading recorded. If the blade and the miter slot were closer together at the rear of the saw, the dial indicator has a negative reading. If the blade and the miter slot were father apart at the rear of the saw, the dial indicator showed a positive reading.

  • DEWALT: 0.01″
  • Milwaukee: 0.08″

Again, DEWALT took the category with a much closer tolerance.

Saw Fence Parallel to Miter Slot

The accuracy and safety of any given saw is dependent upon the blade being parallel to the rip fence. Since we tested the amount of difference in parallelism between the saw blade and the miter slot in the previous test, we need only to see if the miter slot is parallel to the rip fence to see if the saw has a parallel relationship between the blade and the rip fence.

TBB used the same iGauging 35-125-4 digital dial indicator to measure the accuracy of the as-delivered factory fence to the table miter slot. We started by placing the fence in a locked position about 1” away from the blade on the opposite side from the miter slot. We adjusted the throw of the dial indicator so that we took the readings on the indicator, as before, in the middle of the indicator’s range of movement.

We calibrated the iGauging dial indicator to a zero reading at the operator’s end of the rip fence so that we started out with a reading of zero. Next, we positioned the dial indicator to the rear of the saw placed onto the rip fence and took the reading.

If the fence and the miter slot were closer together at the rear of the saw, the dial indicator has a negative reading. If the blade and the miter slot were father apart at the rear of the saw, the dial indicator showed a positive reading. A negative reading meant that the materials being cut might be subject to being pinched and a kick back more likely to occur.

  • DEWALT: 0.032″
  • Milwaukee: 0.065″

Again, DEWALT took the category with a much closer tolerance.

Blade Runout

One term you may hear when reading about table saw accuracy is blade runout. Runout is a term that describes whether or how much the outside edge of a saw blade wobbles while being held by the motor shaft. Sometimes, operators measure runout by using a saw blade. In that case, the very use of a saw blade presumes that the specific blade is perfect or nearly perfect in its flatness. In this comparison, we used the identical balde to measure the blade runout of the saws. This operation was necessary because our ground flat measurement plate is 10 inches in diameter and would not fit in these smaller saws. Using the same blade means the relative results will be an accurate measurement of the saw contribution to runout.

The same iGauging dial indicator provided the test measurements, only this time, the units were set to read out in mm. TBB noticed that in the initial saws, the movements were sufficiently small to need the smaller metric units. TBB placed the dial indicator on the starting position of the test blade and calibrated that position on the dial indicator to a reading of zero. We were very careful to rotate the test blade by using the outside rim so as not to impart any side-to-side force on the plate that might introduce errors into the measurements.

While we rotated the test blade, we recorded the maximum reading on the dial indicator. We validated each maximum reading by running the test for a second time and noting that the readings were consistent.

  • Milwaukee: 0.0049″
  • DEWALT: 0.0065″

For this test Milwaukee finished first.

Overall Cordless Table Saw Precision & Accuracy Results

We performed a total of 9 different measurements in this category and DEWALT took 6 of them, Milwaukee took 2, and one was a tie. DEWALT was the clear winner in this category.

Cordless Table Saw Performance – Winner (A Tie)

The million dollar question about any cordless table saw is how long will it run? We developed three different run-time tests to see how the two saws perform and how long they can run on a fully charged battery pack. These tests also allowed us to compare the saws on how well they “run” during very different cutting applications. The three tests included:

  • Ripping 3/4″ Plywood
  • Ripping 2×6 SPF Framing Lumber
  • Ripping 3/4″ thick IPE Decking

We chose these three materials to help evaluate a wide range or applications and power demand on the table saws. The lightest “demand” being the 3/4″ plywood which is a fairly standard application for a jobsite table saw and also similar to ripping softwood trim like Pine and Poplar. Next we ripped 2×6 SPF framing lumber for a moderate “demand” application. Finally we wanted to see how the saws performed under a difficult “demand” application so we ripped the 1x IPE decking.

We really wanted to see if the different demand applications would show different results for the two drastically different voltage saws.

For this testing we used two different blades from DEWALT and Milwaukee. For each type of wood, we installed a new blade in each saw. We used the same blade for each test. For example, when we cut plywood, both saws used the DEWALT FlexVolt 24T blade. When we ripped the IPE decking both saws were using the Milwaukee 40T finish blade. And for the framing lumber tests we used another set of new DEWALT FlexVolt 24T blades.

The Milwaukee used an 18V, 12 Ah battery pack which is 18V x 12Ah = 216 Wh. The DEWALT used an 60V (54V nom), 4 Ah battery pack which is 54V x 4Ah = 216 Wh.

Run-time Results

In the graphic above are the results from the three different run-time tests that we performed. The run-time results are very close. For the IPE decking both saws cut a total of 256 lineal feet of material. For the framing lumber, DEWALT cut approximately 40 lineal feet more than the Milwaukee with 264 lf compared to 224 lf. And lastly, for the plywood test DEWALT cut approximately 48 lineal feet more than the Milwaukee with 608 lf compared to 560 lf.

So the question really is do either of the saws out-perform the other when it comes to run-time? Clearly the DEWALT was a bit better than the Milwaukee but honestly the difference is so small that it’s virtually a tie. What’s more impressive is the amount of cuts these cordless tablesaws can do on a single charge. Each of the saws was able to make over 70 rip cuts in 3/4″ plywood (8′ long), approximately 30 rip cuts in 2x framing lumber (8′ long), and 32 rips in 3/4″ thick IPE decking (8′ long).

While these numbers certainly are not a big deal if you’re cutting ALL day long on the table saw, they are impressive for punch list and small trim jobs. Also, paired with a second battery it’s likely that most users can keep working all day.

Performance

While cutting all the material for the run-time testing we were able to get a good feel of the two saws and how they compare. Both saws feel very strong and didn’t have trouble cutting the materials we selected for the tests. More notably, everyone felt the Milwaukee cut much smoother and felt a bit stronger. The DEWALT felt like it was “chattering” at times while the Milwaukee cut smoothly and didn’t seem to be bogged down.

Overall Cordless Table Saw Performance

The run-time testing wasn’t much of a surprise to us as we figured that two saws using the same total battery pack energy should provide similar run-time results. While the DEWALT did slightly beat the Milwaukee in two of the tests, the difference really doesn’t change the overall production between the two. On the other hand, the Milwaukee felt like it ran much smoother compared to the DEWALT. At the end of the day we feel the performance of these two saws is too close to declare a winner.

Cordless Table Saw Ergonomics / Features – Winner Milwaukee

Both cordless table saws were compared and evaluated on several ergonomic and feature categories that we feel are important to end users.

  • Weight – Both cordless table saws weigh in at just over 40 lbs (w/out battery); Milwaukee at 43 lbs and DEWALT at 45 lbs. Milwaukee wins by a slight margin.
  • Blade Height Adjustment – The DEWALT saw takes 36 turns of the wheel to raise the blade to full height. The Milwaukee only takes 14 turns to raise the blade full height. Milwaukee is the clear winner with a much more efficient height adjustment design.
  • Switch Design – The Milwaukee has a much better power switch design. One of our big gripes with the DEWALT saw is how the safety switch can easily turn off the saw just after turning the saw on. The switch cover falls down as you remove your fingers and the weight of the cover turns the saw off. The Milwaukee doesn’t suffer from this design issue and therefore is a much better design in our eyes.
  • Blade Change – Milwaukee did a good job using an arbor lock so users only need one wrench to change blades. On the contrary, the DEWALT requires two wrenches which can be cumbersome and not as easy as the arbor lock design.
  • Fence – Both saws use a rack-and-pinion fence design which we prefer
  • Adjustments / Riving Knife – Milwaukee provides a tool free guard and riving knife design, by releasing a lever under the table the riving knife and guard can simply be pulled out. On the other hand, the DEWALT requires a user to take off the throat plate, remove riving knife lock knob then remove the riving knife or guard. This is a pretty big difference in our opinion.
  • Stand Leg Adjustment – The Milwaukee stand does offer a leg leveler but it broke on us not long after putting the saw on a real jobsite. The folks at Milwaukee tell us they are working on an improved design to correct the lack of performance.  The DEWALT stand doesn’t provide a feature for leveling the stand.
  • Stand – Overall the stands are quite similar with one notable exception. The Milwaukee stand has a simple clamp that keeps the stand attached to the saw so you can carry the entire assembly as one, while the DEWALT does not which means users must move both separately.
  • One-Key – Another big feature that Milwaukee offers that DEWALT does not is the One-Key technology. One-Key offers tool lock-out, tool tracking, and a robust asset management feature. This added value offers users peace of mind on busy jobsites.

Overall Milwaukee clearly spent some time looking at the features and ergonomics of the new saw. While both saws have similar features the Milwaukee edges them out in several categories.

Cordless Table Saw Pricing

Obviously pricing is a concern to any user so this category is always important. Below are current pricing for the saw, one battery, and the stand.

  • Milwaukee – M18 Cordless Table Saw, Scissor Stand, 12 Ah battery pack and rapid charger: $628 UPDATED (at the original time of publishing we saw a promo with a free stand, that is no longer available so the pricing was adjusted to include the stand price of $79).
  • DEWALT – 60V Cordless FlexVolt Table Saw, Scissor Stand, 12 Ah battery pack and charger: $710 *
  • * Note: DEWALT isn’t selling any kits that we could find with everything in it so we had to price each item separately, whereas the Milwaukee is sold as a kit which is most likely why the pricing is so good.

The Milwaukee is slightly cheaper than DEWALT.

Best Cordless Table Saw

We seldom have a hard time picking a winner in Head-To-Head testing on TBB but this time the results are far too close. Both the DEWALT and Milwaukee Cordless Table Saws are very good. While the DEWALT offers a slight edge on run-time the Milwaukee has slightly better features and a lower price point. Also, for Milwaukee users this saw is a continuation and expansion of the M18 platform unlike the DEWALT platform that users must move up to the new FlexVolt line.

If you own either of these cordless platforms the selection for you is an easy one. These two saws look like they could be twins other than the paint schemes and their performance certainly matches their appearance.

While we know you guys expect a winner each time, but this was just too close. At the end of the day, these two saws are once again expanding the ever growing cordless job-site and cutting the cord!

Cordless Table Saw – DEWALT vs. Milwaukee

Cordless Jobsite Table Saw Head-To-Head is a post from Tool Box Buzz

]]>
https://www.toolboxbuzz.com/head-to-head/cordless-jobsite-table-saw-head-to-head/feed/ 25
Milwaukee M18 FUEL Cordless Table Saw Giveaway https://www.toolboxbuzz.com/cordless-tools/saws-cordless-tools/milwaukee-m18-fuel-cordless-table-saw-giveaway/ https://www.toolboxbuzz.com/cordless-tools/saws-cordless-tools/milwaukee-m18-fuel-cordless-table-saw-giveaway/#comments Mon, 02 Jul 2018 12:57:11 +0000 http://www.toolboxbuzz.com/?p=18823 You are reading a copy of content from ToolBoxBuzz.com. If you'd like to read it from the original source please follow the link at the bottom.

Milwaukee M18 FUEL Cordless Table Saw Giveaway YOU MUST COPY AND PASTE THE LINK INTO YOUR WEB BROWSER. IF YOU CLICK THE LINK DIRECTLY FROM IG OR FACEBOOK APPS, THE FORM BELOW DOESN’T SEEM TO WORK. ALSO, YOU HAVE TO LOG IN WITH YOUR GOOGLE ACCOUNT. THIS KEEPS PEOPLE FROM ENTERING MANY MULTIPLE TIMES. ONLY […]

Milwaukee M18 FUEL Cordless Table Saw Giveaway is a post from Tool Box Buzz

]]>
You are reading a copy of content from ToolBoxBuzz.com. If you'd like to read it from the original source please follow the link at the bottom.

Milwaukee M18 FUEL Cordless Table Saw Giveaway

YOU MUST COPY AND PASTE THE LINK INTO YOUR WEB BROWSER. IF YOU CLICK THE LINK DIRECTLY FROM IG OR FACEBOOK APPS, THE FORM BELOW DOESN’T SEEM TO WORK. ALSO, YOU HAVE TO LOG IN WITH YOUR GOOGLE ACCOUNT. THIS KEEPS PEOPLE FROM ENTERING MANY MULTIPLE TIMES. ONLY WAY TO KEEP IT FAIR.

We just finished our review of the Milwaukee M18 FUEL Cordless Table Saw and Milwaukee generously gave us a second one to giveaway. The saw isn’t even on the market yet so you could be one of the first to get your hands on one.Milwaukee M18 FUEL Cordless Table Saw Giveaway

Milwaukee M18 FUEL Cordless Table Saw Giveaway Rules:

  1. To enter our give away you must provide your information in the giveaway form at the bottom of this page.
  2. One person will randomly be selected as the winner.
  3. The winner will receive an email and be announced on our Facebook and Instagram pages within 24 hours.
  4. The winners must respond within 48 hours of the first notification to claim the prize.
  5. Open to Canadian and U.S residents only, ages 18 and older.Milwaukee M18 FUEL Cordless Table Saw Giveaway

Milwaukee M18 FUEL Cordless Table Saw Giveaway Extra Credit:

Filling out the form at the bottom of the page is worth one entry but subscribing to our weekly email newsletter will get you an additional entry. Every week we send out an email that is chock full of things that are useful for pros and serious DIY-ers alike.

  • Tips, Techniques and ideas for the Professional and sophisticated hobbyist.
  • Thoughtful and pragmatic PRO and Do-It-Yourself articles
  • The best tools to use on your projects
  • Tool and Product promotional giveaways
  • Tool and product reviews
  • Work shop tips and techniques
  • News and insight on many topics related to the construction, home improvement and remodeling.
  • Solutions to your construction related and home improvement problems
  • Video how-to and tool reviews

Subscribe to the newsletter here. It’s a two-part registration so be sure to confirm your subscription to get the extra credit. If you’re already a subscriber, be sure to include the email address in the form below that you used to sign up for the newsletter. You don’t have to sign up if you don’t want to, we won’t be offended. It’s just an additional entry in the giveaway.Milwaukee M18 FUEL Cordless Table Saw Giveaway

Giveaway Dates:

The Milwaukee M18 FUEL Cordless Table Saw Giveaway ends Friday, July 6th, 2018 at 8 PM CDT.  Good Luck!!

Enter The Milwaukee M18 FUEL Cordless Table Saw Giveaway Giveaway Here

Milwaukee M18 FUEL Cordless Table Saw Giveaway is a post from Tool Box Buzz

]]>
https://www.toolboxbuzz.com/cordless-tools/saws-cordless-tools/milwaukee-m18-fuel-cordless-table-saw-giveaway/feed/ 20
Milwaukee M18 FUEL Cordless Table Saw Review https://www.toolboxbuzz.com/cordless-tools/table-saw-cordless-tools/milwaukee-m18-fuel-cordless-table-saw-review/ https://www.toolboxbuzz.com/cordless-tools/table-saw-cordless-tools/milwaukee-m18-fuel-cordless-table-saw-review/#comments Sat, 30 Jun 2018 21:00:48 +0000 http://www.toolboxbuzz.com/?p=18863 You are reading a copy of content from ToolBoxBuzz.com. If you'd like to read it from the original source please follow the link at the bottom.

M18 FUEL™ 8-1/4″ Table Saw w/ One-Key™ Kit The expansion of larger power tools into the cordless category continues as we see more cordless table saws hitting the market. Milwaukee just released their M18 FUEL 8-1/4″ Table Saw running on their 18 volt platform with a single battery pack. Milwaukee also released a new larger […]

Milwaukee M18 FUEL Cordless Table Saw Review is a post from Tool Box Buzz

]]>
You are reading a copy of content from ToolBoxBuzz.com. If you'd like to read it from the original source please follow the link at the bottom.

M18 FUEL™ 8-1/4″ Table Saw w/ One-Key™ Kit

M18 FUEL™ 8-1/4" Table Saw w/ One-Key™ Kit

4.5/5
Manufacturer: Milwaukee
Model number: 2738-21HD
Price: $549
Power source: 18V Li-Ion
Motor size: Brushless
Weight: 41.6 lbs
The expansion of larger power tools into the cordless category continues as we see more cordless table saws hitting the market. Milwaukee just released their M18 FUEL 8-1/4″ Table Saw running on their 18 volt platform with a single battery pack. Milwaukee also released a new larger capacity M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery at the same time for longer run time and better performance.

While this isn’t the first cordless table saw (our team has been using the DEWALT FlexVolt for over a year now) it is the first 18 volt table saw on the market which is very exciting for users who have invested heavily in the M18 platform already. Early next year we expect to see another cordless option hit the market from Metabo HPT (formerly Hitachi). They will be releasing a MultiVolt option that allows users to use a battery pack or an adapter for AC power. So it’s pretty clear the market sees the need for these cordless saws and the power they produce is really impressive.

We have two of these saws out on the job right now. I have one on a commercial building renovation project and Rob has one on a house addition project. This has allowed us to get some great hands on time with the saws and a great perspective on this new saw.

Features and Specifications

  • 24-1/2 inch Rip Capacity
  • Maximum bevel of 47 degrees
  • Rack and Pinion Fence System
  • All metal frame
  • On board storage for guard, riving knife, push stick, fence and miter gauge
  • Tool free guard and riving knife changes
  • REDLITHIUM High Output HD 12.0 Ah Battery Pack: Provides 50% more power and runs 50% cooler versus standard REDLITHIUM HD packs
  • POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ 8-1/4″ Table Saw w/ One-Key(TM) to provide the power and performance equivalent to a 15A corded circular saw.
  • Compatible with all M18 batteries
  • Single wrench blade change
  • 5 year tool and 3 year battery warranty
  • Includes: 2736-20 8-1/4″ Table Saw, (1) REDLITHIUM High Output HD12.0 Battery, M18 Rapid Charger, Blade, Guard, Riving Knife, Push stick, Miter Gauge and Wrench.

First Impression

Right out of the box the Milwaukee M18 Table Saw impresses with quality materials and a metal frame. The rack and pinion fence is a quality feature that we’ve come to expect from job site table saws. We’ve been BIG fans of the DEWALT rack and pinion fence since its earned its reputation as a sturdy, repeatable and accurate fence.

 

NEW Blade Height Adjustment

One of the more annoying features on the DEWALT Flexvolt is that the operator must rotate the blade height knob many times to get the blade to full height.

Milwaukee designed a larger gearing ratio in their blade height and can achieve full blade height in 14 turns. In contrast, the DEWALT requires 35 turns to raise the blade to full height.

Switch Design

One of the biggest improvements compared to the competition is the on/off switch which works easily and effectively. It’s robust, and much easier to use than the DEWALT switch that can be frustrating at times.

The Milwaukee switch also features “Power Loss Safety,” which means that if switch is powered in the ON position, and the tool stalls, the battery is removed or runs out, the tools trigger will need to be recycled in order to power the saw back on.

Storage and Transport [Stackable]

The frame and handles on the M18 table saw make it very easy to carry and move. Weighing just over 40 lbs this saw is extremely portable and a great option for punch list work, finish work, and remodeling where a large saw isn’t practical. The current project that I’m on is a basement renovation of a commercial building and this saw is far easier to get down the stairs than a full size saw.

One nice feature we notice is how nicely this saw stores on its side in our tool trailer, the table saw feet and table edge are in such a position to allow the tool to sit flat and secure on its side. It also gives a nice stackable option as well and I found myself storing other brand tool box on the saw as sell.

Milwaukee M18 FUEL Cordless Table Saw Review is a post from Tool Box Buzz

]]>
https://www.toolboxbuzz.com/cordless-tools/table-saw-cordless-tools/milwaukee-m18-fuel-cordless-table-saw-review/feed/ 8
Dewalt Flexvolt Table Saw Review https://www.toolboxbuzz.com/cordless-tools/table-saw-cordless-tools/dewalt-flexvolt-table-saw-review/ https://www.toolboxbuzz.com/cordless-tools/table-saw-cordless-tools/dewalt-flexvolt-table-saw-review/#comments Sat, 06 Aug 2016 02:19:37 +0000 http://www.toolboxbuzz.com/?p=11822 You are reading a copy of content from ToolBoxBuzz.com. If you'd like to read it from the original source please follow the link at the bottom.

Dewalt FlexVolt Cordless 8-1/4″ Table Saw – Model DCS7485T1 A solid, safe table saw is the cornerstone to any efficient job-site or worksite. Dewalt wants to close the gap on a cordless job site by introducing several cordless tools including a brand new table saw. We tested the Dewalt Flexvolt   8-1/4” table saw on […]

Dewalt Flexvolt Table Saw Review is a post from Tool Box Buzz

]]>
You are reading a copy of content from ToolBoxBuzz.com. If you'd like to read it from the original source please follow the link at the bottom.

Dewalt FlexVolt Cordless 8-1/4″ Table Saw – Model DCS7485T1

Dewalt Cordless 8-1/4” Table Saw DCS7485T1

5/5
Manufacturer: Dewalt
Model number: DBD606
Price: 449.00
Power source: 60 Volt cordless
Motor size: Brushless 5800 rpm
Weight: 48

A solid, safe table saw is the cornerstone to any efficient job-site or worksite. Dewalt wants to close the gap on a cordless job site by introducing several cordless tools including a brand new table saw. We tested the Dewalt Flexvolt   8-1/4” table saw on our job site and in our shop and were impressed with its portability, versatility, performance and power.

Dewalt Cordless 8-1/4” Table Saw 

This new table saw has all the same features as their corded sibling. So if you’re already used to using a Dewalt table saw, there is NO learning curve.

New Battery Platform

The saw is powered off of a new 15 cell FlexVolt 60V/20V batteries DCB606 which cost approximately $150 each. The 60 volt batteries are backwards compatible meaning that you can use them in the new FlexVolt tools or in any 20 volt platform tools.

What’s in the Box

  • (1) DCS7485 60V MAX* Table Saw
  • (1) Carbide Blade
  • (1) Push Stick
  • (1) Blade Guard
  • (1) Rip Fence
  • (1) Non-Thru Cut Riving Knife
  • (1) 20V/60V MAX* FLEXVOLT Battery
  • (1) Fast Charger
  • (2) Blade Wrenches
  • (1) Miter Gauge

Power and Portability

I was impressed with the cutting power I achieved using the Dewalt Cordless 8-1/4” Table Saw. It has a brush-less motor, and a no-load speed of 5800 rpm.  It measures 12.8 inches high and 22.8 inches long, weighing in at a mere 48 lbs.

battery_right

Dual Power? – NOT YET!

I’m a fan of all Dewalt table saws, but the best feature of this saw is obviously that it’s cordless.

At the Dewalt media event I inquired whether an accessory power cord was in the making, so users could plug into a power outlet for AC current.  Having both options would be nice. The dual option would be handy on construction sites with no power.  On these sites contractors often compete with extension cords for a generator outlet.  Having a cordless option for these situations would be amazing, later on, when the house has power, you could plug in.

According to Dewalt, the cost for an AC adapter /cord similar to the miter saw accessory, would be substantial as the electrical current needs to be converted from 60v to 120V. Dewalt is currently working on a 60v to 120V adapter but it is still about 9 months or more away. [Jan 2017]

Dewalt Cordless 8-1/4” Table Saw 

 

Runtime

According to Dewalt you can rip 302 lineal feet of OSB plywood on one charge.  We did not test this, but we did throw a ton of lumber through it, as well as use this saw to size exterior trim on a sun-room addition and got two days out of one battery. We cut 2×4 KD lumber, plywood, PVC and cedar trim.

I think if this tools battery charge lasts till lunchtime, or a full day, its worth it.  If your serious about using a cordless table saw, I think a second battery is a must!

Update: We’ve been using this saw for 6 months now and it’s a great saw, nothing negative to report.

Electronic Protection System

Like many higher end, Li-ion tools this saw is equipped with an “Electronic Protection System” that will protect the battery pack from overheating, overloading, or deep discharge.

Dewalt Cordless 8-1/4” Table Saw Dewalt Cordless 8-1/4” Table Saw Fence System

I’d be remiss if I didn’t speak to how amazing the Dewalt rack and pinion fence design is. In my opinion, the rack and pinion telescoping fence is the best saw fence on the compact table saw market. It allows me to make super smooth, micro adjustments, with no tapping on the fence with your knuckles or tape measure.

The rip fence can be mounted in two positions;

  • Position 1: which is closer to the blade, will rip 0” to 20.”
  • Position 2: will rip 4” to 24.”

The fence extends wide enough to allow a 24-inch rip capacity on the right side of the blade, and will allow a 12-inch rip to the left of the blade.

The “Work Support / Narrow Ripping Fence” option is a nice addition and one that I have come to enjoy on Dewalt saws.  When used as a support feature it helps keep boards wider than the table top from dipping down when the fence is extended. When used as a narrow rip accessory it provides an extra 2-inches of clearance between the blade and the fence. This helps keep you hand further away from the spinning blade.

Dewalt includes their “Site-Pro Modular Guarding System,” which allows for the blade guard and riving knife to be installed tool free. The blade guard always seemed to be an afterthought for tool manufacturers.  This guard has had some thought put into it and I absolutely love having the riving knife as a safety feature.

The riving knife mirrors the saw blade and does a real nice job at keeping the saw kerf from closing behind the blade while ripping, it also helps prevent a bind between the blade and fence from getting caught by the saw teeth on the back of the blade.

Assembly and Adjustments

The saw was almost perfect out of the box.  I find that all Dewalt table saws are easy to true up, and tune and these adjustments hold up well over time.

Dewalt Cordless 8-1/4” Table Saw 

Power Loss Reset Feature – Safety Switch

Prior to deploying the power loss reset feature there had been many job site horror stories of unattended table saws starting up upon power restoration.  Sometimes this restart caused material damage or personal injury.   This usually happened when the saw operator did not think to turn off the tool before walking away to go restore power. In the meantime, other people have leaned on, temporarily placed tools or even building materials on the saw, a blade spinning disaster waiting to happen.

If this cordless saw’s power is disconnected by disconnecting the battery, or a drained battery, the saw is designed to default to the OFF position

The Dewalt Cordless 8-1/4” Table Saw power switch is located on the front, lower left area of the saw and has a large red stop switch that can also be accessed easily with your knee. The power switch is electronic and the saw operator now has to push a green “on” button as opposed to pulling on the “red” power lever as was the case with older models.  The power switch also has a flip over safety cover that can be secured with a pad lock. The padlock hole diameter requires a ¼” maximum diameter padlock

Durability

The Dewalt Cordless 8-1/4” Table Saw is as durable as all of the previous sibling compact table saws, because it is basically the same saw with a cordless feature.

A metal roll cage protects the saw and has a convenient pivot handle for carrying.  The on board storage for guard, fence, wrenches and miter gauge is decent and secure. The saw table also has a special coating to reduce surface friction cutting.

One neat dust collection feature that goes unseen, unless you’re looking for it is the heavy duty black canvas shroud that is mounted to the underside of the table to the motor.  The canvas is sized to follow the motor as it is raised/lowered or beveled.  The shroud captures and directs dust toward the dust chute. Well done Dewalt!!

Dewalt Table Saw Cutting Specifications

The saw has a 5/8″ arbor and 8-1/4″ blade and will bevel -2 degrees to 47 degrees left.

  • When set to 45° I measured the depth of cut at 1- 3/4″ inches.
  • When set to 90° I measured 2- 1/2″ inches which is respectable.

This saw will not accept a dado blade.

Dust Collection

DEWALT table saws have always had the 2-1/2 dust port at the lower rear end of the tool.  This saw has a 1-1/2 – inch dust port off the top of the blade guard allowing dual dust collection capabilities.

The operator can now capture dust above the blade as well as lower in the blade housing, ensuring you are collecting dust effectively.

The only catch is you need a “Y Connection,” in order to rig this saw up to one vacuum.  Dewalt has told me that they have plans to offer a “Y Connection” as an accessory in the near future.

Saw Stand DW7450

Saw Stand

The recommended stand for Dewalt Cordless 8-1/4” Table Saw DW7485 is the DW7451 saw stand which will be available in mid/late Sept.

Dewalt made a rolling change to the DW7450 Type 2 unit to accept the cordless DCS7485.  If you’re going to purchase the Type 2 saw, make sure you have the correct stand since there is still type 1’s in stock. Frankly, it may make sense to wait.

Improvements

The power switch is a bit finicky.  I noticed this at their media event and also when using the saw.  A quick press of the on button does not work and it seems that you have to press the button for a few seconds.  Additionally, you need to push this button straight on and not at an angle to work.  My guess is That Dewalt will work this out in time.

The price is to be expected for a cordless tool of this stature, but at the same time it will be a deterrent too.

UPDATE ON POWER SWITCH

Further testing showed that the red “Stop” lever was the cause, not the power switch.  After turning on the saw, the red stop lever would drop too hard onto the stop button and turn the saw off.   After conferring with the product manager at Dewalt, it was determined that the red stop lever spring force was too high.  The units we tested was from a “manufacturing sample lot.”  MSL’s are the first time the plant does a big run of the product and Dewalt then has time to refine and make adjustments, before the tool goes to production.

Conclusion

We are very impressed with the Dewalt Cordless 8-1/4” Table Saw and the attention to detail put into it.  This saw is a prime example of the hard work DeWalt put into making their tools, and their commitment to making a cordless job site.

This cordless table saw is a fantastic tool with some nice unique features, it is powerful and you can’t beat the fence system!

Dewalt Cordless 8-1/4” Table Saw DCS7485T1
449.00

Dewalt FlexVolt 60V Cordless Table Saw Video Review

Dewalt Flexvolt Table Saw Review is a post from Tool Box Buzz

]]>
https://www.toolboxbuzz.com/cordless-tools/table-saw-cordless-tools/dewalt-flexvolt-table-saw-review/feed/ 11